Results

Looking for more? ProQuest® Dissertations & Theses has additional dissertations and theses.
43161 open access dissertations and theses found for:
if(Abaqus model)  »   Refine Search
2.
Numerical analysis of the stability of a column laterally restrained by a flexible brace
by Kulchitskaya, Natalia, M.S.  University of Alaska Fairbanks. 2014: 74 pages; 1566808.
3.
Development of a Strain Rate Sensitive Ice Material Model for Hail Ice Impact Simulation
by Tippmann, Jeffery Dwayne, M.S.  University of California, San Diego. 2011: 138 pages; 1488196.
4.
Implementation of the Constitutive Equations of the Gurson Material Model in Finite Element Code
by Darayi, Mohsen, M.S.  Southern Illinois University at Edwardsville. 2018: 66 pages; 10808455.
5.
Analysis of Unstiffened Thin Steel Plate Shear Wall (SPSW) Using an Equivalent Truss-Elements Model
by Attari, Nabil Shouki, M.Sc.  Heriot-Watt University (United Kingdom). 2015: 68 pages; 10692994.
7.
Buckling and Wrinkling Analysis of Composite Sandwich Plates Using Finite Element Methods
by Singh, Sonu Shravan Kumar, M.S.  California State University, Long Beach. 2018: 55 pages; 10752150.
8.
9.
Investigation on the Effect of Void Orientation and Matrix Anisotropy Using a Modified Gurson Model
by Sagsoy, Baris, M.S.  Southern Illinois University at Edwardsville. 2014: 67 pages; 1571928.
10.
Numerical Modeling of Fluid Flow and Heat Transfers in Porous Media
by Spezia, Kyle, M.S.  University of Louisiana at Lafayette. 2015: 51 pages; 10003759.
11.
Direct strength design of cold -formed steel members with perforations
by Moen, Cristopher Dennis, Ph.D.  The Johns Hopkins University. 2009: 551 pages; 3340033.
12.
Prediction of permanent deformation in asphalt concrete
by Carvalho, Regis Luis Egual de, Ph.D.  University of Maryland, College Park. 2012: 262 pages; 3517762.
13.
Numerical Modeling of Fluid Flow in a Porous Media Using Python
by Cooper, Jason, M.S.  University of Louisiana at Lafayette. 2017: 49 pages; 10682421.
16.
Investigating Fluid Flow in Detachment Systems through Numerical Modeling
by Conlin, Daniel, M.S.  University of Louisiana at Lafayette. 2016: 56 pages; 10244580.
17.
Structural Strength at Large Strain and under Softening Compression Damage
by Gattu, Mahendra, Ph.D.  Northwestern University. 2012: 114 pages; 3547840.
18.
20.
Development, testing, and numerical modeling of a foam sandwich biocomposite
by Chan, Kyle E., M.S.  California State University, Long Beach. 2014: 83 pages; 1527682.
21.
Dynamic Finite Element Modeling and Analysis of Blast-resistant Sandwich Structures
by Zhang, Linhui, Ph.D.  University of Connecticut. 2012: 146 pages; 3533976.
22.
A phenomenological model for dynamic recrystallization
by Simmons, Jason Mark, M.S.  Mississippi State University. 2011: 132 pages; 1491087.
23.
Reliability and effect of partially restrained wood shear walls
by Gruber, John J., Ph.D.  Wayne State University. 2012: 217 pages; 3502750.
26.
Principles of the Draw-Bend Springback Test
by Jianfeng, Wang, Ph.D.  The Ohio State University. 2004: 186 pages; 10834906.
27.
Uncertainty quantification of residual stresses induced by laser peening simulation
by Amarchinta, Hemanth, Ph.D.  Wright State University. 2010: 201 pages; 3417107.
28.
Complex Network Analysis for Early Detection of Failure Mechanisms in Resilient Bio-Structures
by Patel, Reena R., Ph.D.  Mississippi State University. 2018: 190 pages; 10979098.
29.
A Simplified Methodology for Validating the Hyper-Viscoelastic (HVE) Dynamic Response
by Gomez Consarnau, Rafael J., M.S.  California State University, Long Beach. 2018: 142 pages; 10837944.
1 - 30 of 43161 displayed.
  1    2    3    4    5    6    7    8    9    10    11   Next >
Copyright © 2019 ProQuest LLC. All rights reserved. Terms and Conditions Privacy Policy Cookie Policy
ProQuest