Results

Looking for more? ProQuest® Dissertations & Theses has additional dissertations and theses.
4122 open access dissertations and theses found for:
dep(Mechanical and Aerospace Engineering)  »   Refine Search
1.
Laser-induced Controlled Generation of Bubbles in Pool Boiling and Study of Bubble Dynamics
by Choudhary, Dilipkumar K., M.S.  California State University, Long Beach. 2019: 77 pages; 22588248.
2.
Optimization of Space Vehicle Cable Weight in 3 Dimensions
by Ortiz, Jason, M.S.  California State University, Long Beach. 2019: 76 pages; 22588572.
3.
Interplanetary Trajectory Optimization of Solar Sails
by Selvaraj, Sandhya, M.S.  California State University, Long Beach. 2018: 63 pages; 10840194.
5.
Numerical investigations of turbulent flow past a rectangular cylinder with active flow control
by Luong, Sanh B., M.S.  California State University, Long Beach. 2016: 101 pages; 10004172.
6.
Consideration of alternative designs for a Percutaneous Endoscopic Gastrostomy feeding tube
by Yerrabolu, Santosh Rohit, M.S.  State University of New York at Buffalo. 2012: 285 pages; 1514418.
7.
Subsonic Jet Noise Reduction via Downstream Fluidic Injection
by Rajput, Pankaj, Ph.D.  New York University Tandon School of Engineering. 2019: 221 pages; 13881760.
8.
A Physical Zero-Knowledge Proof and Unclonable Sensors for Nuclear Warhead Verification
by Philippe, S├ębastien, Ph.D.  Princeton University. 2018: 120 pages; 10813590.
9.
Switching linear parameter-varying control of a variable-speed wind turbine
by Bu, Yiming, M.S.  California State University, Long Beach. 2015: 72 pages; 1596455.
10.
Experimental evaluation of mechanical properties of a hemp fiber reinforced composite sandwich structured panel
by Karim, Mohammed Ahasanul, M.S.  California State University, Long Beach. 2013: 84 pages; 1527386.
11.
Optimum stacking sequence design of composite sandwich panel using genetic algorithms
by Bir, Amarpreet Singh, M.S.  California State University, Long Beach. 2012: 108 pages; 1521611.
12.
Development and Characterization of Solvent-free Graphene Nanoparticle-filled Copolymer of Benzoxazine and Epoxy
by Narongdej, Poom, M.S.  California State University, Long Beach. 2019: 114 pages; 13857958.
13.
A Compact Fourth-Order Finite Volume Method for Structured Curvilinear Grids
by Fedak, Adam, M.S.  University of California, Davis. 2018: 64 pages; 10682563.
14.
Argon-oxygen atmospheric pressure plasma treatment on carbon fiber reinforced polymer for improved bonding
by Chartosias, Marios, M.S.  California State University, Long Beach. 2015: 92 pages; 1606056.
16.
Application of Plasma on Reentry Vehicle Communication and Interplanetary Spacecraft Sterilization
by Fenstermacher, Jarrod J., D.Sc.  The George Washington University. 2012: 196 pages; 3490103.
17.
ONIX: An Open-source Burnup Code for Nuclear Archaeology
by de Troullioud de Lanversin, Julien, Ph.D.  Princeton University. 2019: 176 pages; 22621414.
18.
Numerical and Theoretical Analysis of Aero-Optics with Application to an Optical Turret
by Mathews, Edwin R., Jr., Ph.D.  University of Notre Dame. 2017: 245 pages; 13836454.
19.
Optimization and analysis of a CFJ-airfoil using adaptive meta-model based design optimization
by Whitlock, Michael D., M.S.  California State University, Long Beach. 2015: 82 pages; 1598660.
21.
Non-Membrane, Low Temperature and Low Emission Water Desalination Using Directional Solvent Extraction
by Luo, Shirui, Ph.D.  University of Notre Dame. 2018: 155 pages; 13836273.
23.
Application of systems engineering principles for analysis of utility baseline development process
by Johnson, Benjamin D., M.S.  California State University, Long Beach. 2017: 85 pages; 10252428.
24.
NOx reduction in a compressed natural gas (CNG) engine with humid air intake
by Rahimi, Najmeh, M.S.  California State University, Long Beach. 2016: 70 pages; 10011272.
25.
Investigation of Orbital Debris: Mitigation, Removal, and Modeling the Debris Population
by Slotten, Joel, Ph.D.  The George Washington University. 2016: 107 pages; 10001612.
26.
Unsteady measurement techniques for turbomachinery flows
by Jaffa, Nicholas Andrew, Ph.D.  University of Notre Dame. 2015: 172 pages; 3732212.
27.
Selective Laser Melting Parameters for Use in the Manufacture of Thermoelectric Materials
by Read, Adam Lyle, M.S.  The George Washington University. 2015: 57 pages; 1573386.
28.
Application of systems engineering in installation process for the service industry
by Tavazoei, Saeid, M.S.  California State University, Long Beach. 2014: 96 pages; 1526961.
29.
30.
Robust reduced order control for nonlinear distributed systems of Burgers class
by Schmid, Matthias, M.S.  State University of New York at Buffalo. 2009: 148 pages; 1461767.
1 - 30 of 4122 displayed.
  1    2    3    4    5    6    7    8    9    10    11   Next >
Copyright © 2020 ProQuest LLC. All rights reserved. Terms and Conditions Privacy Policy Cookie Policy
ProQuest