A drill string is the transmission component of rotary drill-rig system used for mining petroleum and natural gas resources. The drill-string system is essentially a long slender structure whose length can be in kilometers. Additionally, the drill-string is subject to discontinuous forces from interactions with the wellbore, which can cause erratic torsion oscillations and stick-slip motions. Here, a unique scaled experimental apparatus has been constructed to understand the dynamics of one section of the drill-string subjected to stick-slip interactions with an outer shell. In both the experimental and modeling efforts, the drill-string system is studied as a slender rod with large discs on either end, with the bottom disc being enclosed within a shell, which is representative of a borehole. The experimental setup allows for studies of stick-slip interactions between a drill-string like system and an outer shell, unlike the prior studies. A series of careful experiments are conducted with special attention to parameters such as the drive speed, the mass imbalance, and the nature of contact between the bottom disc and the outer shell. The experimental results indicate that the rotor motions can be divided into different phases, with each phase being characterized by its own unique features that include bumping, sticking, slipping, and rolling characteristics. In order to gain insights into the drill-string dynamics, reduced-order models have been developed inclusive of a novel drill-string wellbore force-interaction model that can account for stick-slip behavior. Both the experimental observations and model predictions are found to be in agreement, in terms of the system dynamics. Furthermore, parametric studies have been conducted and the findings are presented in the form of experimental and numerical simulation results, and the qualitative changes observed in the dynamics are discussed. These findings suggest that the drill-string curvature and contact friction plays an important role in determining the present of erratic motions. This dissertation effort provides clues to how the drive speed can be used as a control parameter to move the system out of regions of undesired dynamics and how the drill-string motions can be influenced to keep them close to the borehole center.
|Commitee:||Baz, Amr, Chopra, Inderjit, Dasgupta, Abhijit, Karkoub, Mansour, Yu, Miao|
|School:||University of Maryland, College Park|
|School Location:||United States -- Maryland|
|Source:||DAI-B 73/06, Dissertation Abstracts International|
|Keywords:||Drill string, Mass imbalance experiment, Parametric studies, Reduced-order model, Stick-slip interactions|
Copyright in each Dissertation and Thesis is retained by the author. All Rights Reserved
The supplemental file or files you are about to download were provided to ProQuest by the author as part of a
dissertation or thesis. The supplemental files are provided "AS IS" without warranty. ProQuest is not responsible for the
content, format or impact on the supplemental file(s) on our system. in some cases, the file type may be unknown or
may be a .exe file. We recommend caution as you open such files.
Copyright of the original materials contained in the supplemental file is retained by the author and your access to the
supplemental files is subject to the ProQuest Terms and Conditions of use.
Depending on the size of the file(s) you are downloading, the system may take some time to download them. Please be