One of the most promising ways to improve clinical diagnostic tools is to use microfluidic Lab-on-a-chip devices. Such devices can provide a dense array of fluidic components and sensors at the micro-scale which drastically reduce the necessary sample volumes and testing time. This dissertation develops a unique electrochemical sensor array in a microfluidic device for high-throughput, label-free detection of both DNA hybridization and protein adsorption experiments.
The device consists of a patterned 3 x 3 grid of electrodes which can be individually addressed and microfluidic channels molded using the elastomer PDMS. The channels are bonded over the patterned electrodes on a silicon or glass substrate. The electrodes are designed to provide a row-column addressing format to reduce the number of contact pads required and to drastically reduce the complexity involved in scaling the device to include larger arrays. The device includes straight channels of 100 micron height which can be manually rotated to provide either horizontal or vertical fluid flow over the patterned sensors. To enhance the design of the arrayed device, a series of microvalves were integrated with the platform. This integrated system requires rounded microfluidic channels of 32 micron height and a second layer of channels which act as pneumatic valves to pinch off selected areas of the microfluidic channel. With the valves, the fluid flow direction can be controlled autonomously without moving the bonded PDMS layer. Changes to the mechanism of detection and diffusion properties of the system were examined after the integration of the microvalve network.
Protein adhesion studies of three different proteins to three functionalized surfaces were performed. The electrochemical characterization data could be used to help identify adhesion properties for surface coatings used in biomedical devices or for passivating sensor surfaces. DNA hybridization experiments were performed and confirmed both arrayed and sensitive detection. Hybridization experiments performed in the valved device demonstrated an altered diffusion regime which directly affected the detection mechanism. On average, successful hybridization yielded a signal increase 8x higher than two separate control experiments. The detection limit of the sensor was calculated to be 8 nM.
|Commitee:||Bentley, William, Payne, Gregory, Peckerar, Martin, Rubloff, Gary|
|School:||University of Maryland, College Park|
|School Location:||United States -- Maryland|
|Source:||DAI-B 73/02, Dissertation Abstracts International|
|Subjects:||Analytical chemistry, Biochemistry|
|Keywords:||Biomolecules, Biosensors, Lab-on-a-chip, Label-free detection, Microfluidic programmable array|
Copyright in each Dissertation and Thesis is retained by the author. All Rights Reserved
The supplemental file or files you are about to download were provided to ProQuest by the author as part of a
dissertation or thesis. The supplemental files are provided "AS IS" without warranty. ProQuest is not responsible for the
content, format or impact on the supplemental file(s) on our system. in some cases, the file type may be unknown or
may be a .exe file. We recommend caution as you open such files.
Copyright of the original materials contained in the supplemental file is retained by the author and your access to the
supplemental files is subject to the ProQuest Terms and Conditions of use.
Depending on the size of the file(s) you are downloading, the system may take some time to download them. Please be