Heat stress is a common physical agent associated with many occupations. The most commonly used method of assessing heat stress exposure is an empirical method using the Wet Bulb Globe Temperature Index but his method is limited in its ability to parse out individual contributors to the heat stress. The International Organization for Standardization (ISO) published a rational model called Predicted Heat Strain (PHS) in 2004, and rational methods have the advantage of separating out the individual pathways for heat exchange. The objective of this research was a performance assessment of the current PHS model. This experimental design consisted of 15 trials (3 clothing ensembles and 5 heat stress levels) involving 12 men and women. The clothing ensembles were work clothes, NexGen® (microporous) coveralls, and Tychem® QC (vaporbarrier) coveralls. The heat stress levels were 1.0, 2.0, 3.5, 5.5 and 9.0 °C-WBGT above the average critical environment for each ensemble determined in prior studies. The metabolic rate was 190 W/m2. The two outcomes of each trial were an exposure time when core temperature reached 38 °C (ET38) and a Safe Exposure Time (SET) defined as the amount of time required to reach either a core temperature (Tre) = 38.5 ºC, a heart rate of 85% age-estimated maximum, or fatigue.
Trial data for environment, metabolic rate and clothing were inputs to the (PHS) model to determine a predicted amount of time for the participants to reach a Tre = 38 ºC, which was the limiting condition in PHS for acute exposures. The first consideration was predictive validity for which PHS-Time was compared to ET38. The expectation would be that PHS-Time would predict the mean ET response. Results for predictive validity indicated a moderate agreement between ET38 and PHS-Time (r2 of 0.34 and Intraclass Correlation Coefficient at 0.33). When the method for accounting for clothing was changed to that recommended by ISO, the PHS predicted times moved systematically toward a shorter exposure time and modest agreement (r 2 of 0.39 and Intraclass Correlation Coefficient at 0.31). Protective validity was the ability of the PHS-Time to predict an exposure time that would be safe for most people. In this case, PHS-Time was compared to SET. The PHS was protective for 73% of the cases. When it was modified to account for clothing following the ISO method, the protective outcomes were 98%.
In addition, the PHS model examined with respect to starting core temperature and fixed height and weight. Using the actual core temperature improved the outcomes somewhat, but changing from 36.8 to 37.0 would be sufficient. There is a strong tendency to over-predict PHS-Time for individuals with a low body surface area, usually short and lower than average weight.
|Advisor:||Bernard, Thomas E.|
|Commitee:||Ashley, Candi D., MyInarek, Steve, Schwartz, Skai W.|
|School:||University of South Florida|
|School Location:||United States -- Florida|
|Source:||DAI-B 72/11, Dissertation Abstracts International|
|Keywords:||Clothing adjustment factors, Heat storage, Heat stress, Predicted heat strain|
Copyright in each Dissertation and Thesis is retained by the author. All Rights Reserved
The supplemental file or files you are about to download were provided to ProQuest by the author as part of a
dissertation or thesis. The supplemental files are provided "AS IS" without warranty. ProQuest is not responsible for the
content, format or impact on the supplemental file(s) on our system. in some cases, the file type may be unknown or
may be a .exe file. We recommend caution as you open such files.
Copyright of the original materials contained in the supplemental file is retained by the author and your access to the
supplemental files is subject to the ProQuest Terms and Conditions of use.
Depending on the size of the file(s) you are downloading, the system may take some time to download them. Please be