The sun is the most abundant resource of renewable energy available to the Earth. More energy strikes the surface of the earth in one hour than all primary energy consumption by humanity in an entire year. However, solar energy is intermittent, and if it is to become a major contributor to the electricity supply, an inexpensive and reliable form of massive energy storage will be necessary. The ability to convert solar electricity into a liquid fuel is an attractive solution to the energy storage problem. A challenging goal will be to use only H2O and CO2 as feedstocks for making synthetic hydrocarbon fuels. Electroreduction of CO2 to liquid fuels necessitates the use of efficient electrocatalysts to increase efficiency and rate for the essential development of practical industrial processes.
Two approaches towards the storage of energy in chemical bonds are investigated. The photoelectrocatalytic production of CO using CO2 as a feedstock demonstrates the capture of solar energy and subsequent electrochemical conversion into a useful chemical commodity. CO2 is reduced at illuminated p-Silicon (p-Si) cathodes using the electrocatalyst fac-Re(2,2'-bipyridyl)CO 3Cl at a 440 mV less anodic potential when compared to a glassy carbon electrode. Cyclic voltammograms of the electrocatalyst with CO2 show an increase in current at the second reduction wave.
In the second approach, a fully integrated system for a directly coupled solar photovoltaic driven CO2 electrolyzer was built and characterized. The design and theoretical voltage requirements show a minimum practical voltage of 3.4 V even though the thermodynamic minimum is only 1.33 V. The balancing of a non-linear power supply to a non-linear load reveals a self-stabilizing nature. An overall solar conversion efficiency (&eegr;TOT) of 2.1% is achieved by using the electrocatalyst Re(4,4'-di-tert-butyl-2,2'-bipyridine)(CO) 3Cl. Theoretical calculations predict an upper efficiency limit of 21% for a single junction solar cell coupled to an electrolyzer. This stand-alone performance shows great promise and demonstrates the need for further development of more efficient CO2 electrocatalysts.
|Advisor:||Kubiak, Clifford P.|
|Commitee:||Asbeck, Peter M., Bandaru, Prabhakar R., Tauber, Michael J., Yu, Paul KL|
|School:||University of California, San Diego|
|Department:||Materials Sci and Engineering|
|School Location:||United States -- California|
|Source:||DAI-B 72/10, Dissertation Abstracts International|
|Subjects:||Chemical engineering, Materials science|
|Keywords:||Artificial photosynthesis, Carbon dioxide, Electrocatalysis, Photovoltaics, Renewable energy, Reverse combustion, Solar energy, Synthetic fuels|
Copyright in each Dissertation and Thesis is retained by the author. All Rights Reserved
The supplemental file or files you are about to download were provided to ProQuest by the author as part of a
dissertation or thesis. The supplemental files are provided "AS IS" without warranty. ProQuest is not responsible for the
content, format or impact on the supplemental file(s) on our system. in some cases, the file type may be unknown or
may be a .exe file. We recommend caution as you open such files.
Copyright of the original materials contained in the supplemental file is retained by the author and your access to the
supplemental files is subject to the ProQuest Terms and Conditions of use.
Depending on the size of the file(s) you are downloading, the system may take some time to download them. Please be