Delay variability poses a formidable challenge in both design and test of nanometer circuits. While process parameter variability is increasing with technology scaling, as circuits are becoming more complex, the dynamic or vector dependent variability is also increasing steadily. In this research, we develop solutions to incorporate the effect of delay variability in delay testing. We focus on two different applications of delay testing.
In the first case, delay testing is used for testing the timing performance of a circuit using path based fault models. We show that if dynamic delay variability is not accounted for during the path selection phase, then it can result in targeting a wrong set of paths for test. We have developed efficient techniques to model the effect of two different dynamic effects namely multiple-input switching noise and coupling noise. The basic strategy to incorporate the effect of dynamic delay variability is to estimate the maximum vector delay of a path without being too pessimistic.
In the second case, the objective was to increase the defect coverage of reliability defects in the presence of process variations. Such defects cause very small delay changes and hence can easily escape regular tests. We develop a circuit that facilitates accurate control over the capture edge and thus enable faster than at-speed testing. We further develop an efficient path selection algorithm that can select a path that detects the smallest detectable defect at any node in the presence of process variations.
|Advisor:||Abraham, Jacob A.|
|Commitee:||Nassif, Sani, Orshansky, Michael, Pan, David, Reichl, Linda|
|School:||The University of Texas at Austin|
|School Location:||United States -- Texas|
|Source:||DAI-B 70/09, Dissertation Abstracts International|
|Keywords:||Coupling noise, Delay testing, Dynamic variations, Path delay measurement, Small delay defects|
Copyright in each Dissertation and Thesis is retained by the author. All Rights Reserved
The supplemental file or files you are about to download were provided to ProQuest by the author as part of a
dissertation or thesis. The supplemental files are provided "AS IS" without warranty. ProQuest is not responsible for the
content, format or impact on the supplemental file(s) on our system. in some cases, the file type may be unknown or
may be a .exe file. We recommend caution as you open such files.
Copyright of the original materials contained in the supplemental file is retained by the author and your access to the
supplemental files is subject to the ProQuest Terms and Conditions of use.
Depending on the size of the file(s) you are downloading, the system may take some time to download them. Please be