The purpose of this project was to design an asphere optic that would be integrated into an intraocular lens. The even asphere design featured a bi-sign surface which reduced longitudinal spheric aberrations and was dened with a spherical conic constant.
The optical quality of the lens was simulated through a variety of programs including Zemax OpticStudio and MATLAB. Properties such as optical power, resolution eciency, and MTF resolution were calculated and used as the criteria of acceptance during the manufacturing of the lenses. By testing these properties and comparing the actual results to the theoretical results, it was concluded that the feasibility of manufacturing the lenses was possible.
|Commitee:||Zhou, Stephen, Jaikumar, Prashanth, Kwon, Chuhee|
|School:||California State University, Long Beach|
|Department:||Physics and Astronomy|
|School Location:||United States -- California|
|Source:||MAI 81/2(E), Masters Abstracts International|
Copyright in each Dissertation and Thesis is retained by the author. All Rights Reserved
The supplemental file or files you are about to download were provided to ProQuest by the author as part of a
dissertation or thesis. The supplemental files are provided "AS IS" without warranty. ProQuest is not responsible for the
content, format or impact on the supplemental file(s) on our system. in some cases, the file type may be unknown or
may be a .exe file. We recommend caution as you open such files.
Copyright of the original materials contained in the supplemental file is retained by the author and your access to the
supplemental files is subject to the ProQuest Terms and Conditions of use.
Depending on the size of the file(s) you are downloading, the system may take some time to download them. Please be