Dissertation/Thesis Abstract

Stress-induced Damage and Post-fire Response of Aluminum Alloys
by Chen, Yanyun, Ph.D., Virginia Polytechnic Institute and State University, 2014, 126; 10595102
Abstract (Summary)

Aluminum alloys have increasing applications in construction and transportation industries. Both 5xxx-series (Al-Mg) and 6xxx-series (Al-Mg) alloys are frequently used in marine construction because of their light weight, high strength, and corrosion resistance. One of the major concerns regarding the marine application of aluminum alloys is their mechanical performance in fire scenarios. The material strength may be degraded due to both thermal and mechanical damage during fire exposure.

This work emphasizes the stress-induced mechanical (physical) damage and its impact on the residual (post-fire) performance of 5083-H116 and 6061-T651 aluminum alloy. Thermomechanical tests were performed at various temperatures and stresses to study the stress-induced damage at induced plastic creep strain levels. Unstressed thermally exposed and thermomechanically damaged samples were examined to separate the stress-induced microstructural damage. The stress-induced microstructural damage primarily manifests itself as dynamic recovery at low creep temperatures, while cavitation, dynamic recrystallization and dynamic precipitation (in Al6061) are the types of damage developed in the high creep strains at high exposure temperatures. Different creep mechanisms are also studied for both Al5083 and Al6061.

The post-fire mechanical response at room temperature after thermo-mechanical damage was investigated with reference to the damaged microstructure present in the material. Residual material strengths based on deformed cross sectional area after the creep test were calculated to provide insight into how microstructural damage affects the post-fire material performance. The competing effects of strength degradation caused by cavitation and strengthening due to grain elongation and subgrain refinement were investigated. Engineering residual material strengths calculated based on the original cross sectional area prior to creep tests were also studied to provide guidance for structural design.

Indexing (document details)
Advisor: Case, Scott W.
Commitee:
School: Virginia Polytechnic Institute and State University
Department: Engineering Mechanics
School Location: United States -- Virginia
Source: DAI-B 78/09(E), Dissertation Abstracts International
Source Type: DISSERTATION
Subjects: Mechanics, Mechanical engineering, Materials science
Keywords: Aluminum alloys, Cavitation, Fire response, Grain deformation, Residual strength, Stress-induced damage
Publication Number: 10595102
ISBN: 9781369749946
Copyright © 2019 ProQuest LLC. All rights reserved. Terms and Conditions Privacy Policy Cookie Policy
ProQuest