Dissertation/Thesis Abstract

Iterative receiver for flip orthogonal frequency division multiplexing and proposed 5G modulation techniques
by Bagdiya, Anshul P., M.S., California State University, Long Beach, 2017, 44; 10251768
Abstract (Summary)

In Optical Wireless Communication (OWC) systems, the technique of Flip-Orthogonal Frequency Division Multiplexing (Flip-OFDM) is applied, where the positive segment and negative segment of the signal are transmitted on two continuous OFDM sub-frames. Conventionally in Flip-OFDM, data is recovered by simply subtracting the negative sub-frame from the positive sub-frame. But the signal survey confirms that the information in both sub-frames gets disrupted during signal propagation and an incorrect detection of the received values takes place at the detector.

An iterative receiver is proposed that utilizes the input signal values along with the received signals sub-frames to improve the efficacy of the Flip-OFDM. The Matlab software is used to design the transmitter and iterative receiver. Features such as cyclic prefixing, frame multiplexing, and channel characterization are included in the design.

The results of the simulation depict that the suggested receiver delivers a superior Bit Error Rate (BER) and Signal to Noise Ratio (SNR) gain when compared to the conservative receiver.

Indexing (document details)
Advisor: Shahian, Bahram
Commitee: Mozumdar, Mohammad, Yeh, Hen-Geul
School: California State University, Long Beach
Department: Electrical Engineering
School Location: United States -- California
Source: MAI 56/03M(E), Masters Abstracts International
Source Type: DISSERTATION
Subjects: Electrical engineering
Keywords:
Publication Number: 10251768
ISBN: 9781369484069
Copyright © 2019 ProQuest LLC. All rights reserved. Terms and Conditions Privacy Policy Cookie Policy
ProQuest