The goal of this project is to use the LabVIEW computational environment to develop, simulate and evaluate the system model and controller design for the vibration control of an Active Mass Damper (AMD) experimental setup. The AMD system consists of a one-story building model, with a control mass on the roof. Output measurements consist of mass position and roof acceleration. A state space model of the AMD system was developed previously, and has been used for the current work. The report provides (a) Review of system modeling, and a LabVIEW-based system model; (b) Development and LabVIEW-based simulation of a full order observer, in the absence of complete state information; (c) LabVIEW based animation of the system response.
|Commitee:||Ary, James, Khoo, I-Hung|
|School:||California State University, Long Beach|
|School Location:||United States -- California|
|Source:||MAI 55/01M(E), Masters Abstracts International|
Copyright in each Dissertation and Thesis is retained by the author. All Rights Reserved
The supplemental file or files you are about to download were provided to ProQuest by the author as part of a
dissertation or thesis. The supplemental files are provided "AS IS" without warranty. ProQuest is not responsible for the
content, format or impact on the supplemental file(s) on our system. in some cases, the file type may be unknown or
may be a .exe file. We recommend caution as you open such files.
Copyright of the original materials contained in the supplemental file is retained by the author and your access to the
supplemental files is subject to the ProQuest Terms and Conditions of use.
Depending on the size of the file(s) you are downloading, the system may take some time to download them. Please be