Permanent deformation is a major distress in flexible pavements that leads to the development of rutting along the wheel path of heavily trafficked roads. Early detection of rutting is very important for preventive maintenance programs and design of rehabilitation strategies. Rutting by definition is the accumulated permanent deformation that remains after removal of the load. Rigorous modeling of permanent deformations using nonlinear finite element analysis based on the correct physical mechanism of residual deformations after removal of the load provides important insights into the rutting problem. This dissertation documents the study of permanent deformation in asphalt concrete in pavement structures using a fully mechanistic model based on Schapery's viscoelasticity and Perzyna's viscoplasticity theories. The model is calibrated and implemented in a 3D finite element commercial software package. Two calibration procedures are performed and discussed. Two immediate practical applications are shown and a simulation of full scale accelerated pavement test is performed.
This research demonstrates that the Perzyna-HiSS viscoplastic model can be successfully calibrated using either research-grade creep and recovery tests or the more simple and production-oriented Flow Number test. The importance of induced shear stress reversals under a moving wheel load is documented. The 3D finite element simulation is then used to identify the fundamental differences on how rutting develops in different pavement structures in terms of the differences in the transverse profile and distribution of rutting within the layer. The analysis results are used to develop new pavement-specific depth functions for potential future incorporation into the AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG). Lastly, the 3D finite element model is used to predict rutting at one lane of the FHWA's full-scale Accelerated Load Facility experiment. After correction for some anomalies during the early loading cycles in the experiment, the predicted and measured rutting at the center of the wheel path were in good agreement.
|Advisor:||Schwartz, Charles W.|
|Commitee:||Aggour, M. Sherif, Aydilek, Ahmet H., Gibson, Nelson H., Goulias, Dimitrios G., Lee, Sung|
|School:||University of Maryland, College Park|
|School Location:||United States -- Maryland|
|Source:||DAI-B 73/12(E), Dissertation Abstracts International|
|Subjects:||Mechanics, Civil engineering, Materials science|
|Keywords:||Asphalt concrete, Pavement mechanics, Pavement performance, Permanent deformation, Viscoelasticity, Viscoplasticity|
Copyright in each Dissertation and Thesis is retained by the author. All Rights Reserved
The supplemental file or files you are about to download were provided to ProQuest by the author as part of a
dissertation or thesis. The supplemental files are provided "AS IS" without warranty. ProQuest is not responsible for the
content, format or impact on the supplemental file(s) on our system. in some cases, the file type may be unknown or
may be a .exe file. We recommend caution as you open such files.
Copyright of the original materials contained in the supplemental file is retained by the author and your access to the
supplemental files is subject to the ProQuest Terms and Conditions of use.
Depending on the size of the file(s) you are downloading, the system may take some time to download them. Please be