Knowing the efficiency of a pumping unit has important operational and financial benefits to those who operate the unit. Historically efficiency is collected on a periodic basis through on-site collection of the necessary parameters. Unit efficiency can be calculated on a real time basis by combining telemetered data with fluid properties in a Real Time Transient Model (RTTM). This method however needs to be validated in order to ensure it is equivalent to field efficiency testing.
The RTTM was expanded to be able to calculate unit efficiency utilizing telemetered data and modeled fluid properties. Three crude oil and two refined products units were configured in the model to perform the calculations. Data from each of the units was stored in a relational database for later analysis. Date and time, efficiency ratio (current efficiency/manufacturer's efficiency), flow rate and viscosity were stored once every fifteen minute. Field efficiency test data was retrieved and then compared to the telemetered data. A deviation of one percent or less was considered acceptable.
Where the two methods did not correlate within the required one percent, the data was analyzed to determine the root cause. Errors in the model's algorithms and potential errors in field data collection account for all departures. This research supports the use of the RTTM to calculate unit efficiency.
|Advisor:||Cockrell, Gerald W.|
|Commitee:||Ashby, Joe E., Beach, David P.|
|School:||Indiana State University|
|Department:||Electronics, Computer, and Mechanical Engineering Technology|
|School Location:||United States -- Indiana|
|Source:||MAI 50/05M, Masters Abstracts International|
|Subjects:||Engineering, Remote sensing|
|Keywords:||Automation, Efficiency, Modeling, Pump|
Copyright in each Dissertation and Thesis is retained by the author. All Rights Reserved
The supplemental file or files you are about to download were provided to ProQuest by the author as part of a
dissertation or thesis. The supplemental files are provided "AS IS" without warranty. ProQuest is not responsible for the
content, format or impact on the supplemental file(s) on our system. in some cases, the file type may be unknown or
may be a .exe file. We recommend caution as you open such files.
Copyright of the original materials contained in the supplemental file is retained by the author and your access to the
supplemental files is subject to the ProQuest Terms and Conditions of use.
Depending on the size of the file(s) you are downloading, the system may take some time to download them. Please be